Technisub Look / Aqualung Look - How to replace the lenses?

If you have this mask and want to change the lenses (to new or optical ones) by yourself follow this instructions (it's easy but if you're doing this for the first time you may have some problems):

1. Remove the little plastic part on the top of the mask (it's this yellow part on the image above).


2. Remove two plastic "rings" which secure optical lenses from dropping out. Unmount them with your fingers. For each side simply catch the little plastic grip (the only accessible part of the ring) and using as much forse as you need pull it out. To make it easier you may try to bend the side of the mask a bit.


3. Remove the old lenses.


4. Make sure the new lenses are mounted correctly (so that they fit the silicon ring inside the mask well).


5. Mount the plastic covers. Make sure all latches do a little "click".


6. Put the "yellow plastic thingy" on the mask.

Have more fun from diving with your new "Look"!